part no. ecn # rev -a revisions description drawn date date date checkd apprvd 18/01/12 18/01/12 01/02/12 jagan farnell released mcd series important notice : this data sheet and its contents (the "information") belong to the mem- bers of the premier farnell group of companies (the "group") or are licensed to it. no licence is granted for the use of it other than for information purposes in connection with the products to which it relates. no licence of any intellectual property rights is granted. the information is subject to change without notice and replaces all data sheets previously sup- plied. the information supplied is believed to be accurate but the group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. users of this data sheet should check for themselves the information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. liability for loss or damage resulting from any reliance on the information or use of it (including liability resulting from negligence or where the group was aware of the possibility of such loss or damage arising) is excluded. this will not oper- ate to limit or restrict the group's liability for death or personal injury resulting from its negli- gence. multicomp is the registered trademark of the group. ? premier farnell plc 2012. tolerances: drawn by: ashok jagan checked by: approved by: date: drawing title: switch - ds, dp, da series m10001964 18/01/12 date: size scale: nts u.o.m.: mm sheet: 1 of 5 dwg no. electronic file rev a a date: 01/02/12 unless otherwise specified, dimensions are for reference purposes only. ashok 18/01/12 73742_dwg dimensions : millimetres (inches) schematic (typical) (2, 4, 6, 8, 10 and 12 pos avails) ds pcb layout
part no. ecn # rev -a revisions description drawn date date date checkd apprvd 18/01/12 18/01/12 01/02/12 jagan farnell released mcd series important notice : this data sheet and its contents (the "information") belong to the mem- bers of the premier farnell group of companies (the "group") or are licensed to it. no licence is granted for the use of it other than for information purposes in connection with the products to which it relates. no licence of any intellectual property rights is granted. the information is subject to change without notice and replaces all data sheets previously sup- plied. the information supplied is believed to be accurate but the group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. users of this data sheet should check for themselves the information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. liability for loss or damage resulting from any reliance on the information or use of it (including liability resulting from negligence or where the group was aware of the possibility of such loss or damage arising) is excluded. this will not oper- ate to limit or restrict the group's liability for death or personal injury resulting from its negli- gence. multicomp is the registered trademark of the group. ? premier farnell plc 2012. tolerances: drawn by: ashok veena checked by: approved by: date: drawing title: switch - ds, dp, da series 73742_dwg m10001964 18/01/12 date: size scale: nts u.o.m.: mm sheet: 2 of 5 dwg no. electronic file rev a a date: 01/02/12 unless otherwise specified, dimensions are for reference purposes only. ashok 18/01/12 dimensions : millimetres (inches) schematic (typical) (4, 6 and 8 pos avails) da pcb layout
part no. ecn # rev -a revisions description drawn date date date checkd apprvd 18/01/12 18/01/12 01/02/12 jagan farnell released mcd series important notice : this data sheet and its contents (the "information") belong to the mem- bers of the premier farnell group of companies (the "group") or are licensed to it. no licence is granted for the use of it other than for information purposes in connection with the products to which it relates. no licence of any intellectual property rights is granted. the information is subject to change without notice and replaces all data sheets previously sup- plied. the information supplied is believed to be accurate but the group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. users of this data sheet should check for themselves the information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. liability for loss or damage resulting from any reliance on the information or use of it (including liability resulting from negligence or where the group was aware of the possibility of such loss or damage arising) is excluded. this will not oper- ate to limit or restrict the group's liability for death or personal injury resulting from its negli- gence. multicomp is the registered trademark of the group. ? premier farnell plc 2012. tolerances: drawn by: ashok veena checked by: approved by: date: drawing title: switch - ds, dp, da series 73742_dwg m10001964 18/01/12 date: size scale: nts u.o.m.: mm sheet: 3 of 5 dwg no. electronic file rev a a date: 01/02/12 unless otherwise specified, dimensions are for reference purposes only. ashok 18/01/12 dimensions : millimetres (inches) schematic (typical) (4, 6 and 8 pos avails) dp pcb layout dp series
part no. ecn # rev -a revisions description drawn date date date checkd apprvd 18/01/12 18/01/12 01/02/12 jagan farnell released mcd series important notice : this data sheet and its contents (the "information") belong to the mem- bers of the premier farnell group of companies (the "group") or are licensed to it. no licence is granted for the use of it other than for information purposes in connection with the products to which it relates. no licence of any intellectual property rights is granted. the information is subject to change without notice and replaces all data sheets previously sup- plied. the information supplied is believed to be accurate but the group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. users of this data sheet should check for themselves the information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. liability for loss or damage resulting from any reliance on the information or use of it (including liability resulting from negligence or where the group was aware of the possibility of such loss or damage arising) is excluded. this will not oper- ate to limit or restrict the group's liability for death or personal injury resulting from its negli- gence. multicomp is the registered trademark of the group. ? premier farnell plc 2012. tolerances: drawn by: ashok veena checked by: approved by: date: drawing title: switch - ds, dp, da series 73742_dwg m10001964 18/01/12 date: size scale: nts u.o.m.: mm sheet: 4 of 5 dwg no. electronic file rev a a date: 01/02/12 unless otherwise specified, dimensions are for reference purposes only. ashok 18/01/12 specifications: mechanical: mechanical life : 2,000 operations per switch maximum operation force : 400 gf (dp series) : 1,000gf maximum (ds and da series) stroke : 2 mm operation temperature : -20c to +70c storage temperature : -40c to +85c electrical: electrical life : 2,000 operations per switch 24 v dc, 25 ma non-switching rating : 100 ma, 50 v dc switching rating : 25 ma, 24 v dc maximum contact resistance : 50 m ? at initial insulation resistance : 100 m ? dielectric strength : 500 v ac for one minute circuit : spst materials: base : pbt thermoplastic colour : black cover : pbt thermoplastic colour : red, black and blue actuators : pbt high thermoplastic colour : white contact : phosphor bronze with gold plating over nickel top seal : polyester film potting material : epoxy soldering process: keep all switch contacts in their ?off? position for all operations wave soldering : recommended temperature at 500f (260c) maximum 5 seconds for through hole type hand soldering : use a soldering iron of 30 watts, controlled at 350c approximately maximum 5 seconds make sure switch is in ?off? position during soldering process, or it will decrease the operating force and meanwhile increase the contact resistance do not wash the switch body except top tape sealed type, which suitable for spray cleaning method from top of the s/w
|
